To access the menu, navigate to either of the following:
Note: This menu is available only in network printers or printers that are attached to print servers.
Set the current TCP/IP hostname.
View or change the current TCP/IP address.
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP.
View or change the current TCP/IP netmask.
View or change the current TCP/IP gateway.
Specify the DHCP address and parameter assignment.
Note: On is the factory default setting.
Specify the RARP address assignment setting.
Note: Off is the factory default setting.
Specify the BOOTP address assignment setting.
Specify the Zero Configuration Networking setting.
Note: Yes is the factory default setting.
Send files to the printer using the built‑in FTP server.
Enable HTTP Server
Enable the built-in Web server (Embedded Web Server) which lets you monitor and manage the printer remotely using a Web browser.
WINS Server Address
View or change the current WINS server address.
View or change the current DDNS setting.
View or change the current mDNS setting.
DNS Server Address
View or change the current DNS server address.
Backup DNS Server Address
View or change the current HTTPS setting.