| Reduce power consumption when the printer receives no data from the Ethernet network. Note: Enable is the factory default setting. |
| Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. Notes: - On is the factory default setting.
- If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
|
| Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. Notes: - On is the factory default setting.
- If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
|
| Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: - Auto is the factory default setting.
- The printer automatically restarts when the setting is changed from the control panel.
|
Network Buffer - Auto
- 3KB to
[maximum size allowed]
| Set the size of the network input buffer. Notes: - Auto is the factory default setting.
- The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
- To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel, serial, and USB buffers.
- The printer automatically restarts when the setting is changed from the control panel.
|
| Temporarily store print jobs in the printer hard disk before printing. This menu only appears when a formatted disk is installed. Notes: - Off is the factory default setting.
- The printer automatically restarts when the setting is changed from the control panel. The menu selection is then updated.
|
| Set the printer to process Macintosh binary PostScript print jobs. Note: Auto is the factory default setting. |
| Show and set the printer network settings. Note: The Wireless menu appears only when the printer is connected to a wireless network. |