Lexmark CS410
Print Mode
Specify whether images are printed in black and white or in color.
Notes:
Color Correction
Adjust the color output on the printed page.
Print Resolution
Specify the printed output resolution in dots per inch or in color quality (CQ).
Note: 4800 CQ is the factory default setting.
Toner Darkness
Lighten or darken the printed output.
Enhance Fine Lines
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.
Color Saver
Reduce the amount of toner used for graphics and images. The amount of toner used for text is not reduced.
RGB Brightness
Adjust the printed output either by lightening or darkening it. You can conserve toner by lightening the output.
Note: 0 is the factory default setting.
RGB Contrast
Adjust the contrast of printed objects.
RGB Saturation
Adjust saturation in color outputs.
Color Balance
Adjust color in printed output by increasing or decreasing the amount of toner being used for each color.
Color Samples
Print sample pages for each of the RGB and CMYK color conversion tables used in the printer.
Manual Color
Customize the RGB color conversions.
Select from the following options:
Manual Color (continued)
Customize the CMYK color conversions.
Spot Color Replacement
Assign specific CMYK values to named spot colors.
Note: This menu is available only in the Embedded Web Server.
Color Adjust
Initiate a recalibration of color conversion tables and allow the printer to make adjustments for color variations in output.
Lexmark CS and MX310, 410, 510 Series Printers and MFPs: Print Quality Diagnostic Tool
This article shows the primary information required to escalate print quality issues.