Skip to Content Information Center
Lexmark MX511

Lexmark MX511

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

  • The printer firmware has been updated.
  • The tray for the print job is removed.
  • The print job is sent from a flash drive that is no longer attached to the USB port.
  • The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer model.

From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm.

Je bil ta članek koristen?