Skip to Content Information Center
Lexmark MS812dn / MS812dtn

Lexmark MS812dn / MS812dtn

Paper jam in the front door

CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  1. Open the front cover and the multipurpose feeder.

  2. Remove the toner cartridge.

  3. Remove the imaging unit.

    Warning—Potential Damage:  Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

  4. Remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  5. Insert the imaging unit.

    Note:  Use the arrows on the side of the printer as a guide.

  6. Insert the toner cartridge.

  7. Close the multipurpose feeder door and the front cover.

  8. If necessary, press on the control panel.

Was this article helpful?