Skip to Content Information Center
Lexmark MS812dn / MS812dtn

Lexmark MS812dn / MS812dtn

Staple jam in the finisher

  1. Open the staple access door.

  2. Remove the staple cartridge holder.

  3. Open the staple guard, and then remove the loose staples.

  4. Close the staple guard.

  5. Press the staples against the metal bracket.

    Note:  If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the staples near the metal bracket.

  6. Insert the staple cartridge holder.

  7. Close the staple access door.

  8. If necessary, press on the control panel.

Was this article helpful?