Skip to Content Information Center
Lexmark MS812dn / MS812dtn

Lexmark MS812dn / MS812dtn

Nije vaš proizvod?

Using Eco‑Mode

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings > General Settings > Eco‑Mode.

  3. Select a setting.

    UseTo

    Off

    Use the factory default settings for all settings associated with Eco‑Mode.

    Notes:

    • Settings that were changed when other modes were selected are reset to the factory default settings.
    • Off supports the performance specifications of the printer.

    Energy

    Reduce energy use, especially when the printer is idle.

    Notes:

    • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
    • The printer enters Sleep mode after one minute of inactivity.
    • The printer display is turned off when the printer is in Sleep mode.
    • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

    Energy/Paper

    Use all the settings associated with Energy and Paper modes.

    Plain Paper

    Enable the automatic two‑sided (duplex) printing feature.

  4. Click Submit.
Da li vam je ovaj članak pomogao?
Top