Skip to Content Information Center
Lexmark MS812dn / MS812dtn

Lexmark MS812dn / MS812dtn

Not your product?

Using Eco‑Mode

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings > General Settings > Eco‑Mode.

  3. Select a setting.

    UseTo

    Off

    Use the factory default settings for all settings associated with Eco‑Mode.

    Notes:

    • Settings that were changed when other modes were selected are reset to the factory default settings.
    • Off supports the performance specifications of the printer.

    Energy

    Reduce energy use, especially when the printer is idle.

    Notes:

    • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
    • The printer enters Sleep mode after one minute of inactivity.
    • The printer display is turned off when the printer is in Sleep mode.
    • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.

    Energy/Paper

    Use all the settings associated with Energy and Paper modes.

    Plain Paper

    Enable the automatic two‑sided (duplex) printing feature.

  4. Click Submit.
Was this article helpful?


Related content

Top