Lexmark MS812dn / MS812dtn
Note: This menu appears only when an optional serial card is installed.
Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language.
Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol.
Set the size of the serial input buffer.
Temporarily store print jobs on the printer hard disk before printing.
Select the hardware and software handshaking settings for the serial port.
Determine whether the printer communicates availability to the computer.
Specify the rate at which data can be received through the serial port.
Specify the number of data bits sent in each transmission frame.
Note: 8 is the factory default setting.
Set the parity for serial input and output data frames.
Note: None is the factory default setting.
Determine whether the printer uses the DSR Signal.