Skip to Content Information Center
Lexmark MS810n / MS810dn / MS810dtn

Lexmark MS810n / MS810dn / MS810dtn

Using Eco‑Mode

  1. Open a Web browser, and then type the printer IP address in the address field.


    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  2. Click Settings > General Settings > Eco‑Mode.

  3. Select a setting.



    Use the factory default settings for all settings associated with Eco‑Mode.


    • Settings that were changed when other modes were selected are reset to the factory default settings.
    • Off supports the performance specifications of the printer.


    Reduce energy use, especially when the printer is idle.


    • Printer engine motors do not start until a document is ready to print. You may notice a short delay before the first page is printed.
    • The printer enters Sleep mode after one minute of inactivity.
    • The printer display is turned off when the printer is in Sleep mode.
    • Lights on the staple finisher and other optional finishers are turned off when the printer is in Sleep mode.


    Use all the settings associated with Energy and Paper modes.

    Plain Paper

    Enable the automatic two‑sided (duplex) printing feature.

  4. Click Submit.

Was this article helpful?