Printer configurations

Basic model

1	Standard bin
2	Printer control panel
3	Multipurpose feeder
4	Standard 550‑sheet tray (Tray 1)

Fully configured model

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

	Hardware option	Alternative hardware option
1	Staple finisher	Output expander 4‑bin mailbox Staple, hole punch finisher
2	4‑bin mailbox	Staple finisher Staple, hole punch finisher Output expander
3	Caster base	None
4	2100‑sheet tray	None
5	550‑sheet tray	250‑sheet tray
6	250‑sheet tray	550‑sheet tray
7	4‑bin mailbox	Output expander
8	Output expander	4‑bin mailbox

The staple, hole punch finisher must not be combined with any other output options.

In a configuration with three optional finishers, the output expander and mailbox may be installed in any order.

In a configuration with two optional finishers:

The staple finisher must always be on top.

The high‑capacity output expander must always be at the bottom.

The output expander is the only option that can be placed on top of the high‑capacity output expander.

When using optional trays:

Always use a caster base when the printer is configured with a 2100‑sheet tray.

The 2100‑sheet tray must always be at the bottom of a configuration.

A maximum of four optional trays may be configured with the printer.

The optional 250‑ and 550‑sheet trays may be installed in any order.

Da li vam je ovaj članak pomogao?