Skip to Content Information Center
Lexmark MS811

Lexmark MS811

Printer configurations

Basic model

1

Standard bin

2

Printer control panel

3

Multipurpose feeder

4

Standard 550‑sheet tray (Tray 1)

Fully configured model

CAUTION—TIPPING HAZARD:  Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

The following illustration shows the maximum number of optional finishers and trays that are supported by the printer. For more information on other configurations, visit www.lexmark.com/multifunctionprinters.

Hardware optionAlternative hardware option

1

Staple finisher

  • Output expander
  • 4‑bin mailbox
  • Staple, hole punch finisher

2

4‑bin mailbox

  • Staple finisher
  • Staple, hole punch finisher
  • Output expander

3

Caster base

None

4

2100‑sheet tray

None

5

550‑sheet tray

250‑sheet tray

6

250‑sheet tray

550‑sheet tray

7

4‑bin mailbox

Output expander

8

Output expander

4‑bin mailbox

The staple, hole punch finisher must not be combined with any other output options.

In a configuration with two or more optional finishers:

  • The staple finisher must always be on top.
  • The high‑capacity output expander must always be at the bottom.
  • The output expander is the only option that can be placed on top of the high‑capacity output expander.
  • The output expander and mailbox may be installed in any order.

When using optional trays:

  • Always use a caster base when the printer is configured with a 2100‑sheet tray.
  • The 2100‑sheet tray must always be at the bottom of a configuration.
  • A maximum of four optional trays may be configured with the printer.
  • The optional 250‑ and 550‑sheet trays may be installed in any order.
Je li vam ovaj članak pomogao?
Top