PPDS menu

Orientation

• Portrait
• Landscape

Sets the orientation of the text and graphics on the page

Notes:

• Portrait is the factory default setting.
• Settings are duplicated in the PCL Emulation menu.

Lines per Page

• 1–255

Sets the number of lines that print on each page

Notes:

• 64 is the factory default setting.
• The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.

Lines per Inch

• 0.25–30.00

Sets the number of lines that print per inch

Notes:

• 6 is the factory default setting.
• Lines per Inch can be increased or decreased in 0.25‑inch increments

Page Format

• Print
• Whole

Sets the logical and physical printable area of the page

Notes:

• Print is the factory default setting. Print data maintains its position with respect to edge of the paper.
• When Whole is selected, document margins are calculated from the top left corner of the physical edge of the page.
• Printing does not occur outside the printable area.

Character Set

• 1
• 2

Specifies a default character set for PPDS print jobs

Notes:

• 2 is the factory default setting. Character Set 2 is composed of printable characters and symbols used in non‑US English languages.
• When Characters Set 1 is selected, values given to the printer are interpreted as printer commands.

Best Fit

• On
• Off

Replaces a missing font with a similar font

Note:  On is the factory default setting. If the requested font is not found, the printer will use a similar font.

Tray 1 Renumber

• Off
• Tray  2

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Notes:

• Off is the factory default setting.
• Tray 2 is displayed only when it is installed.

Auto CR after LF

• On
• Off

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Notes:

• Off is the factory default setting.
• Settings are duplicated in the PCL Emulation menu.

Auto LF after CR

• On
• Off

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Notes:

• Off is the factory default setting.
• Settings are duplicated in the PCL Emulation menu.