Set the language of the text that appears on the display.
Note: Not all languages are available for all printer models. You may need to install special hardware for some languages.
Show Supply Estimates
View supply estimates on the control panel, Embedded Web Server, menu settings, and device statistics reports.
Note: Show estimates is the factory default setting.
Minimize the use of energy, paper, or specialty media.
Reduce printer noise.
Note: Off is the factory default setting.
Run Initial Setup
Run the setup wizard.
Specify a language and custom key information for the keyboard on the display.
Specify the unit of measurement for paper sizes.
Note: US is the factory default setting.
Specify the display information in the upper corners of the home screen.
Select from the following options:
Displayed Information (continued)
Customize the text to display in the upper corners of the home screen.
Specify the display information for Black Toner.
Specify the display information for Paper Jam, Load Paper, and Service Errors.
Home screen customization
Change the icons that appear on the control panel.
Format the printer date.
Format the printer time.
Specify the brightness of the display.
Set the amount of light from the bin.
Set the button volume and feedback.
Specify whether to display bookmarks from the Held Jobs area.
Web Page Refresh Rate
Specify the time between Embedded Web Server refreshes.
Specify a contact name for the printer.
Specify the printer location.
Set an alarm when the printer requires user intervention.
Set the idle time before the printer enters a lower power state.
Set the idle time before the printer begins operating in Sleep Mode.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
Set the time before the printer enters Hibernate mode.
Note: 3 days is the factory default setting.
Set the printer to Hibernate mode even if there is an active Ethernet or fax connection.
Note: Do Not Hibernate is the factory default setting.
Set the idle time before the display automatically returns to Ready state.
Note: 30 seconds is the factory default setting.
Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen.
Set the printer to end a print job after it has been idle for the specified amount of time.
Set the time the printer waits to receive for more data before canceling a print job.
Set the time the printer waits for user intervention before it holds jobs that require unavailable resources.
Set the printer to restart when an error occurs.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can perform.
Note: 5 is the factory default setting.
Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints jammed pages unless other tasks need the memory required to hold the pages.
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Set the printer to print the correct output for a page.
Adjust the Voice Guidance speaking rate.
Note: Normal is the factory default setting.
Set the headphones volume.
Information Sent to Lexmark
Send anonymous device usage information to Lexmark.
Note: The default value depends on what you selected during the initial setup.
Press Sleep Button
Determine how the printer, while in idle state, reacts to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Determine how the printer, while in idle state, reacts to a long press of the Sleep button.
Note: Do Nothing is the factory default setting.
Restore the printer factory default settings.
Custom Home Message
Select a custom home message that appears as an alternating display of the printer status.
Note: This menu appears only in non‑touch‑screen printer models.
Export Configuration Package
Export the configuration package to a flash drive.
Export Compressed Logs File
Export the compressed logs file to a flash drive.
Configure your printer and computer so they can communicate after installing a serial port on your printer.