Skip to Content
Information Center
Informačné centrum
Paper and specialty media guide
Paper guidelines
Selecting preprinted forms and letterhead
Lexmark MS810n / MS810dn / MS810dtn
Nie je toto váš výrobok?
Skúste hľadať v Informačnom centre
Prejsť
Selecting preprinted forms and letterhead
Use grain long for 60–90‑g/m
2
(16–24‑lb) paper.
Use only forms and letterhead printed using an offset lithographic or engraved printing process.
Avoid paper with rough or heavily textured surfaces.
Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not.
Print samples on preprinted forms and letterheads considered for use before buying large quantities. This determines whether or not the ink in the preprinted form or letterhead will affect print quality.
When in doubt, contact your paper supplier.
Pomohol vám tento článok?
Áno
Nie
Návody
Videonávody
Špecifikácie
MS810n
MS810dn
MS810dtn
Slovník
Bezpečnosť, oznámenia a konvencie
Top