Miscellaneous Security Settings menu

Login Restrictions

• Login failures
• Failure time frame
• Lockout time
• Panel Login Timeout
• Remote Login Timeout

Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out.

Notes:

• “Login failures” specifies the number of failed login attempts before users are locked out. Settings range from 1 to 10 attempts. “3 attempts” is the factory default setting.
• “Failure time frame” specifies the time frame during which failed login attempts can be made before users are locked out. Settings range from 1 to 60 minutes. “5 minutes” is the factory default setting.
• “Lockout time” specifies how long users are locked out after exceeding the login failures limit. Settings range from 1 to 60 minutes. “5 minutes” is the factory default setting. 1 indicates that the printer does not impose a lockout time.
• Panel Login Timeout specifies how long the printer remains idle on the home screen before automatically logging off the user. Settings range from 1 to 900 seconds. “30 seconds” is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains idle before automatically logging off the user. Settings range from 1 to 120 minutes. “10 minutes” is the factory default setting.

Security Reset Jumper

• No Effect
• Access controls=“No Security”
• Reset factory security defaults

Adjust the security settings.

Notes:

• No Effect means the reset has no effect on the printer security configuration.
• Access controls=’No Security’ retains all the security information that the user has defined. No Security is the factory default setting.
• “Reset factory security defaults” deletes all security information that the user has defined, and restores the factory default settings in the Miscellaneous Security menu.

LDAP Certificate Verification

• Demand
• Try
• Allow
• Never

Allow the user to request a server certificate.

Notes:

• “Demand” is the factory default setting. This means a server certificate is requested. If a bad certificate is provided or if no certificate is provided, then the session is terminated immediately.
• “Try” means a server certificate is requested. If no certificate is provided, then the session proceeds normally. If a bad certificate is provided, then the session is terminated immediately.
• “Allow” means a server certificate is requested. If no certificate is provided, then the session proceeds normally. If a bad certificate is provided, then it will be ignored and the session proceeds normally.
• “Never” means no server certificate is requested.

Minimum PIN Length

• 1–16

Limit the digit length of the personal identification number (PIN).

Note:  4 is the factory default setting.