Skip to Content Information Center
Lexmark MX310

Lexmark MX310

Making copies using paper from a selected tray

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.


    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the printer control panel, navigate to:

     > Copy >  > Copy from >  select the size of the original document

  4. Navigate to:

    Copy to >  >  select the tray containing the paper size and type you want to use >  >  select the number of copies or enter a number on the keypad > 

  5. If there are no trays that contain the paper size and type you want to use, then do the following:

    1. Navigate to:

      Copy to >  > Manual Feeder >  >  select the paper size >  >  select the paper type > 

    2. Load the size and type of paper into the multipurpose feeder, and then press .

    3. Note:  If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press .

  6. Press the left or right arrow button to scroll to Finish the Job, and then press .

Was this article helpful?