Skip to Content Information Center
Lexmark MX310

Lexmark MX310

Making a copy lighter or darker

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass in the upper left corner.

    Notes:

    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the printer control panel, navigate to:

     > Copy >  > Darkness >  adjust the darkness setting >  select the number of copies or enter a number on the keypad > 

    Note:  If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press .

  4. Press the left or right arrow button to scroll to Finish the Job, and then press .

Da li vam je ovaj članak pomogao?
Top