Skip to Content Information Center
Lexmark MX310

Lexmark MX310

Copying multiple pages onto a single sheet

    To save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.


    • Make sure the paper size is set to letter, legal, A4, or JIS B5.
    • The copy size must be set to 100%.
  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.


    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the printer control panel, navigate to:

     > Copy >  > Paper Saver >  select the setting that you want

  4. Select Off, 2‑up Portrait, 2‑up Landscape, 4‑up Portrait, or 4‑up Landscape.

  5. Select the number of copies or enter a number on the keypad, and then press .

    Note:  If you want to copy another document, then place it on the scanner glass, press the left or right arrow button to scroll to Scan the Next Page, and then press .

  6. Press the left or right arrow button to scroll to Finish the Job, and then press .

Was this article helpful?