Lexmark MS310
Close front door
Replace imaging unit
Replace unsupported toner cartridge
Replace unsupported imaging unit
Toner cartridge, imaging unit mismatch
Canceling print job
Flushing buffer
Resolution reduced
The lights blink one at a time from left to right repeatedly.
Non-Lexmark supply type
Printer had to restart
Toner cartridge very low
Imaging unit very low
Toner cartridge nearly low
Imaging unit nearly low
Service error
Load paper
Remove paper from standard bin
Toner cartridge low
Imaging unit low
Ready
Waiting
Busy
Not ready
If the light sequence matches a light sequence in the Primary light sequence column of the following table, then press twice. Search for a matching light sequence in the Supplemental light sequence column, and then see the corresponding error message or printer status.
Missing or unresponsive toner cartridge
Replace toner cartridge
Toner cartridge, printer region mismatch
Missing or unresponsive imaging unit
Standard network software error
Network [x] software error
Insufficient memory to collate job
PPDS font error
Complex page
Insufficient memory to support Resource Save feature
Standard parallel port disabled
Rear USB port disabled
Too many trays attached
Incorrect paper size
Memory full
Paper jam, clear standard bin
Paper jam, remove standard tray to clear duplex
Paper jam, open rear door
Paper jam, open front door
Paper jam, remove standard tray
Paper jam, manual feeder
Learn how to update the firmware of the printer using the control panel.
Here’s how to interpret ‘Toner Low’ message on theLexmark E260 and MS31x models.