Skip to Content Information Center
Lexmark MS310

Lexmark MS310

Not your product?

Configuring Sleep and Hibernate modes

Sleep and Hibernate are low‑power operating modes.

Notes:

  • If your printer is connected directly to a computer, access the Sleep and Hibernate mode settings using the Local Printer Settings Utility or Printer Settings depending on your operating system.
  • Three days is the default amount of time before the printer enters Hibernate mode.
  • Wake the printer from Hibernate mode before sending a print job. A long press of the Sleep button wakes the printer from Hibernate mode.
  • If the printer is in Hibernate mode, then the Embedded Web Server is disabled.

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings > General Settings > Sleep Button Settings.

  3. From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Sleep or Hibernate.

  4. Click Submit.
Was this article helpful?


Related content

Top