PCL Emul menu

PCL Emulation Settings

• Orientation
• Portrait
• Landscape

Specify the orientation of text and graphics on the page.

Notes:

• Portrait is the factory default setting. Portrait prints text and graphics parallel to the short edge of the page.
• Landscape prints text and graphics parallel to the long edge of the page.

PCL Emulation Settings

• Lines per Page
• 1–255

Specify the number of lines that print on each page.

Notes:

• 60 is the US factory default setting. 64 is the international default setting.
• The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Set Paper Size and Orientation before setting Lines per Page.

PCL Emulation Settings

• A4 Width
• 198  mm
• 203  mm

Set the printer to print on A4‑size paper.

Notes:

• 198  mm is the factory default setting.
• The 203‑mm setting sets the width of the page to allow printing of eighty 10‑pitch characters.

PCL Emulation Settings

• Auto CR after LF
• On
• Off

Specify whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command.

Note:  Off is the factory default setting.

PCL Emulation Settings

• Auto LF after CR
• On
• Off

Specify whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command.

Note:  Off is the factory default setting.

Tray Renumber

• Assign MP Feeder
• Off
• None
• 0–199
• Assign Tray  [x]
• Off
• None
• 0–199
• Assign Manual Paper
• Off
• None
• 0–199
• Assign Manual Env
• Off
• None
• 0–199

Configure the printer to work with printer software or programs that use different source assignments for trays and feeders.

Notes:

• Off is the factory default setting.
• None cannot be selected. It is only displayed when it is selected by the PCL  5 interpreter. It also ignores the Select Paper Feed command.
• 0–199 allows a custom setting to be assigned.

Tray Renumber

• View Factory Defaults
• MPF Default = 8
• T1 Default = 1
• T1 Default = 4
• T1 Default = 5
• T1 Default = 20
• T1 Default = 21
• Env Default = 6
• MPaper Default = 2
• MEnv Default = 3

View the factory default setting assigned to each tray or feeder.

Tray Renumber

• Restore Defaults
• Yes
• No

Restore all tray and feeder assignments to the factory default settings.