| Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language. Notes: - On is the factory default setting.
- If PCL SmartSwitch is enabled, then the printer uses PCL emulation.
- If PCL SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
|
| Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language. Notes: - On is the factory default setting.
- If PS SmartSwitch is enabled, then the printer uses PostScript emulation.
- If PS SmartSwitch is disabled, then the printer does not examine incoming data and it uses the default printer language specified in the Setup menu.
|
USB Buffer - Disabled
- Auto
- 3K to [maximum size allowed]
| Set the size of the USB input buffer. Notes: - Auto is the factory default setting.
- Disabled turns off job buffering.
- The USB buffer size value can be changed in 1KB increments.
- The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
- To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers.
- The printer automatically restarts when the setting is changed. The menu selection is then updated.
|