Skip to Content Information Center
Lexmark MS410

Lexmark MS410

Using the Embedded Web Server

Note:  This feature is available only in network printers or printers connected to print servers.

If the printer is installed on a network, then you can use the Embedded Web Server to do the following:

  • View the virtual display of the printer control panel.
  • Check the status of the printer supplies.
  • Configure supply notifications.
  • Configure printer settings.
  • Configure network settings.
  • View reports.

    To access the Embedded Web Server for your printer:

  1. Obtain the printer IP address:

    • From the TCP/IP section in the Network/Ports menu
    • By printing a network setup page or menu settings page, and then finding the TCP/IP section
    • Notes:

      • An IP address appears as four sets of numbers separated by periods, such as
      • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  2. Open a Web browser, and then type the printer IP address in the address field.

  3. Press Enter.

    The Embedded Web Server page appears.

Was this article helpful?