Skip to Content Information Center
Lexmark MS410

Lexmark MS410

Paper jam in the front door

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  1. Open the front door.

  2. Remove the toner cartridge.

  3. Remove the imaging unit.

    Warning—Potential Damage:  Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

    Warning—Potential Damage:  Do not touch the shiny photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs.

  4. Remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  5. Insert the imaging unit.

    Note:  Use the arrows inside the printer as guides.

  6. Insert the toner cartridge.

  7. Close the front door.

  8. From the control panel, press .

Was this article helpful?