Skip to Content Information Center
Lexmark MS410

Lexmark MS410

Not your product?

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

    Using the Embedded Web Server

  1. Open a Web browser, and then type the printer IP address in the address field.

    Notes:

    • Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

  2. Click Settings  > General Settings  > Timeouts.

  3. From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

  4. Click Submit.

    Using the printer settings on the computer

  • Depending on your operating system, access the Hibernate Timeout menu using the Local Printer Settings Utility or Print Settings.
Was this article helpful?


Related content

Top