TCP/IP menu

Set Hostname

Set the host name.

Notes:

• This setting can be changed only from the Embedded Web Server.
• The host name can be up to 15 characters and can be a US‑ASCII or alphanumeric character, or hyphen.

IP Address

View or change the current TCP/IP address.

Note:  Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP.

Netmask

View or change the current TCP/IP netmask.

Gateway

View or change the current TCP/IP gateway.

Enable DHCP

• On
• Off

Specify the DHCP address and parameter assignment.

Note:  On is the factory default setting.

Enable AutoIP

• Yes
• No

Specify the Zero Configuration Networking setting.

Note:  Yes is the factory default setting.

Enable FTP/TFTP

• Yes
• No

Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.

Note:  Yes is the factory default setting.

Enable HTTP Server

• Yes
• No

Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser.

Note:  Yes is the factory default setting.

WINS Server Address

View or change the current WINS server address.

Enable DDNS

• Yes
• No

View or change the current DDNS setting.

Note:  Yes is the factory default setting.

Enable mDNS

• Yes
• No

View or change the current mDNS setting.

Note:  Yes is the factory default setting.

DNS Server Address

View or change the current DNS server address.

Backup DNS Server Address

Backup DNS Server Address 2

Backup DNS Server Address 3

Enable HTTPS

• Yes
• No

View or change the current HTTPS setting.

Note:  Yes is the factory default setting.