Skip to Content Information Center
Lexmark MS410

Lexmark MS410

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

  • Check if the imaging unit is missing. If missing, then install the imaging unit.
  • For information on installing the imaging unit, see the “Replacing supplies” section.
  • If the imaging unit is installed, then remove and reinstall the unresponsive imaging unit.
  • Note:  If the message appears after reinstalling the supply, then replace the imaging unit. The imaging unit may be defective or a non‑genuine Lexmark supply. For more information, see Using genuine Lexmark parts and supplies.

Was this article helpful?