Skip to Content Information Center
Lexmark MS610dn / MS610dtn

Lexmark MS610dn / MS610dtn

Това не е вашия продукт?

Connecting the printer using the Wireless Setup Wizard

Before you begin, make sure that:

  • A wireless network adapter is installed in the printer and is working properly. For more information, see the instruction sheet that came with the wireless network adapter.
  • The Ethernet cable is disconnected from the printer.
  • Active NIC is set to Auto. To set this to Auto, navigate to either of the following:
    •  > Settings >  > Network/Ports >  > Active NIC >  > Auto > 
    •  > Network/Ports > Active NIC > Auto

Note:  Make sure to turn off the printer, then wait for at least five seconds, and then turn the printer back on.

  1. Depending on your printer model, navigate to either of the following:

    •  > Settings >  > Network/Ports >  > Network  [x] >  > Network  [x]  Setup >  > Wireless >  > Wireless Connection Setup > 
    •  > Network/Ports > Network  [x] > Network  [x]  Setup > Wireless > Wireless Connection Setup

  2. Select a wireless connection setup.

    UseTo

    Search for networks

    Show available wireless connections.

    Note:  This menu item shows all broadcast secured or unsecured SSIDs.

    Enter a network name

    Manually type the SSID.

    Note:  Make sure to type the correct SSID.

    Wi‑Fi Protected Setup

    Connect the printer to a wireless network using Wi‑Fi Protected Setup.

  3. Follow the instructions on the printer display.
Полезна ли ви беше тази статия?
Top