Installing a memory card

CAUTION—SHOCK HAZARD:  If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage:  Controller board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any controller board electronic components or connectors.

An optional memory card can be purchased separately and attached to the controller board.



1. Access the controller board.

   • For the MS510dn, MS517dn, MS610dn, and MS617dn printer models, see Accessing the controller board.
   • For the MS610de printer model, see Accessing the controller board.


2. Unpack the memory card.

   Warning—Potential Damage:  Do not touch the connection points along the edge of the card.



3. Align the notch (1) on the memory card with the ridge (2) on the connector.

   


4. Push the memory card straight into the connector and forward into the controller board wall until it clicks into place.

   


5. For the MS510dn, MS517dn, MS610dn, and MS617dn printer models, close the controller board access door.

   For the MS610de printer model, close the controller board shield, and then close the access door.

Note:  When the printer software and any hardware options are installed, add the options manually in the print driver to make them available for print jobs. For more information, see Adding available options in the print driver.