Skip to Content Information Center
Lexmark MX611

Lexmark MX611

Scanning to an FTP address using the printer control panel

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.


    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the printer control panel, navigate to:

    FTP > FTP >  type the FTP address > Done > Send It

Was this article helpful?