Skip to Content Information Center
Lexmark MX611

Lexmark MX611

Nije vaš proizvod?

Setting up Multi Send

Note:  A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com.

UseTo

Scan a document, and then send the scanned document to multiple destinations.

Note:  Make sure there is enough space in the printer hard disk.

  1. Open a Web browser, and then type the printer IP address in the address field.

    Note:  View the printer IP address on the printer home screen. The printer IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

  2. Click Settings > Apps > Apps Management > Multi  Send.

  3. From the Profiles section, click Add, and then customize the settings.

    Notes:

    • See the mouse‑over help beside each field for a description of the setting.
    • If you select FTP or Share Folder as a destination, then make sure the location settings of the destination are correct. Type the correct IP address of the host computer where the specified destination is located. For more information on obtaining the IP address of the host computer, see Finding the IP address of the computer.

  4. Click Apply.

To use the application, touch Multi Send on the printer home screen, and then follow the instructions on the printer display.
Je li vam ovaj članak pomogao?
Top