Skip to Content Information Center
Lexmark CX510

Lexmark CX510

Adding e-mail subject and message information

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

    Notes:

    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the home screen, navigate to:

    E-mail > Recipient(s) >  type the e‑mail address > Done

  4. Touch Subject, then type the e‑mail subject, and then touch Done.

  5. Touch Message, then type your message, and then touch Done.

Was this article helpful?
Top