Lexmark CX410
Print Mode
Specify whether to print images in color.
Note: Color is the factory default setting.
Color Correction
Adjust the color output on the printed page.
Note: Auto is the factory default setting.
Print Resolution
Specify the output resolution in dots per inch (dpi) or in color quality (CQ).
Note: 4800 CQ is the factory default setting.
Toner Darkness
Lighten or darken the output.
Note: 4 is the factory default setting.
Enhance Fine Lines
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit diagrams, and flow charts.
Note: Off is the factory default setting.
Color Saver
Reduce the amount of toner used for graphics and images.
Notes:
RGB Brightness
Adjust the brightness of the output.
Note: 0 is the factory default setting.
RGB Contrast
Adjust the contrast of the output.
RGB Saturation
Adjust saturation in color outputs.
Color Balance
Enable an equal balance of colors in the output.
Color Samples
Print sample pages for each of the RGB and CMYK color conversion tables used in the printer.
Manual Color
Customize the RGB color conversions.
Select from the following options:
Manual Color (continued)
Customize the CMYK color conversions.
Note: US CMYK is the U.S. factory default setting. Euro CMYK is the international factory default setting.
Color Adjust
Initiate a recalibration of color conversion tables and allow the printer to make adjustments for color variations in output.
Spot Color Replacement
Assign specific CMYK values to named spot colors.
Note: This menu is available only on the Embedded Web Server.
RGB Replacement
Match the colors of the output with that of the original document.
Lexmark CS and MX310, 410, 510 Series Printers and MFPs: Print Quality Diagnostic Tool
This article shows the primary information required to escalate print quality issues.