The printer has a 250-sheet tray (Tray 1) with an integrated manual feeder. The 250-sheet tray and the 650-sheet duo tray support the same paper sizes and types and are loaded in the same way.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.
Pull out the tray completely.
Note: Do not remove trays while a job is printing or while Busy appears on the display. Doing so may cause a jam.
If the paper is longer than letter‑size paper, then squeeze and then slide the length guide at the back of the tray to extend it.
Squeeze, and then slide the length guide tab to the correct position for the size of the paper being loaded.
Note: Use the paper size indicators on the bottom of the tray to help position the guide.
Squeeze, and then slide the width guide tab to the correct position for the size of the paper being loaded.
Note: Use the paper size indicators on the bottom of the tray to help position the guides.
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.
Load the paper stack with the recommended printable side faceup.
Place the paper guides securely against the edges of the paper.
Insert the tray.
From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Note: Mixing paper sizes or paper types in a tray may cause jams.