Universal Setup menu

Units of Measure

• Inches
• Millimeters

Identify the units of measure.

Notes:

• Inches is the US factory default setting.
• Millimeters is the international factory default setting.

Portrait Width

• 3–8.5  inches
• 76–216  mm

Set the portrait width.

Notes:

• If the width exceeds the maximum, then the printer uses the maximum width allowed.
• 8.5  inches is the US factory default setting. You can increase the width in 0.01‑inch increments.
• 216  mm is the international factory default setting. You can increase the width in 1‑mm increments.

Portrait Height

• 3–14.17  inches
• 76–360  mm

Set the portrait height.

Notes:

• If the height exceeds the maximum, then the printer uses the maximum height allowed.
• 14  inches is the US factory default setting. You can increase the height in 0.01‑inch increments.
• 356  mm is the international factory default setting. You can increase the height in 1‑mm increments.

Feed Direction

• Short Edge
• Long Edge

Specify the feed direction if the paper can be loaded in either direction.

Notes:

• Short Edge is the factory default setting.
• Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.