Skip to Content Information Center
Lexmark CX317

Lexmark CX317

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60–90‑g/m2 (16–24‑lb) paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid paper with rough or heavily textured surfaces.

Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not.

When in doubt, contact your paper supplier.

Was this article helpful?