Skip to Content Information Center
Lexmark CS820

Lexmark CS820

Not your product?

Replacing the fuser

  1. Turn off the printer.

  2. Open door B.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  3. Remove the fuser.

  4. Unpack the new fuser.

  5. Clean the fuser lens using the cotton swab that came with the package.

  6. Insert the new fuser until it clicks into place.

  7. Close door B.

  8. Turn on the printer.
Was this article helpful?


Related content

Top