Skip to Content Information Center
Lexmark CS827

Lexmark CS827

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to:

  • Set up the printer near a properly grounded and easily accessible electrical outlet with correct voltage and current capability.
  • Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer:
    • Clean, dry, and free of dust.
    • Away from stray staples and paper clips.
    • Away from the direct airflow of air conditioners, heaters, or ventilators.
    • Free from direct sunlight and humidity extremes.
  • Observe the recommended temperatures and avoid fluctuations:
  • Ambient temperature

    10 to 32.2°C (50 to 90°F)

    Storage temperature

    -40 to 43.3°C (-40 to 110°F)
  • Allow the following recommended amount of space around the printer for proper ventilation:
  • 1


    305 mm (12 in.)


    Right side

    152 mm (6 in.)



    381 mm (15 in.)


    Left side

    457 mm (18 in.)



    203 mm (8 in.)
Was this article helpful?