Skip to Content Information Center
Lexmark XC8155

Lexmark XC8155

Installing the staple finisher

  1. Turn off the printer.

  2. Open door C.

  3. Remove the paper bail.

  4. Remove the paper transport and staple finisher connector covers.

  5. Unpack the staple finisher.

  6. Insert the staple finisher until it clicks into place.

  7. Close door C.

    CAUTION—PINCH HAZARD:  To avoid the risk of a pinch injury, keep hands clear of the labeled area when closing door C.

  8. Turn on the printer.

Was this article helpful?