Skip to Content Information Center
Lexmark CX827

Lexmark CX827

Replacing an imaging unit

  1. Open door A.

  2. Remove the waste toner bottle.

  3. Remove the imaging unit.

  4. Unpack the new imaging unit, and then remove the packing material.

    Warning—Potential Damage:  Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

    Warning—Potential Damage:  Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.

  5. Insert the new imaging unit.

  6. Insert the waste toner bottle.

  7. Close door A.

Was this article helpful?