Skip to Content Information Center
Lexmark MX710

Placing separator sheets between copies

  1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.


    • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.
    • The ADF indicator light comes on when the paper is loaded properly.
  2. If you are loading a document into the ADF tray, then adjust the paper guides.

  3. From the home screen, navigate to:

    Copy > Advanced Options > Separator Sheets

    Note:  Set Collate to “1,2,3 ‑ 1,2,3” to place separator sheets between copies. If Collate is set to “1,1,1 ‑ 2,2,2,” then the separator sheets are added to the end of the copy job. For more information, see Collating copies.

  4. Select one of the following:

    • Between Copies
    • Between Jobs
    • Between Pages
    • Off
  5. Touch  > Copy It.

Pomohol vám tento článok?