Skip to Content Information Center
Lexmark MX711

Lexmark MX711

Moving the printer to another location

CAUTION—POTENTIAL INJURY:  The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:  When moving the printer, follow these guidelines to avoid personal injury or printer damage:

  • Turn off the printer, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer.
  • If the printer has a caster base, then carefully roll it to the new location.
  • If the printer does not have a caster base but is configured with optional trays, then lift the printer off the trays. Do not try to lift the printer and the trays at the same time.
  • Use the handholds on the printer to lift it.
  • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
  • Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.
  • Make sure that your fingers are not under the printer when you set it down.
  • Make sure that there is adequate clearance around the printer.
  • Use only the power cord provided with this product or the manufacturer’s authorized replacement.

Note:  Damage to the printer caused by improper moving is not covered by the printer warranty.

Was this article helpful?
Top