Skip to Content Information Center
Lexmark MX711

Lexmark MX711

[x]‑page jam, open upper and lower rear door. [231–234]

CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

  1. Pull down the rear door.

  2. Firmly grasp the jammed paper on each side, and then gently pull it out.

    Note:  Make sure all paper fragments are removed.

  3. Close the rear door.

  4. Push the back of the standard tray.

  5. Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out.

    Note:  Make sure all paper fragments are removed.

  6. Insert the standard tray.

  7. From the printer control panel, touch Done to clear the message and continue printing.

Was this article helpful?
Top