Skip to Content Information Center
Lexmark XC4150

Lexmark XC4150

Not your product?

Replacing the pick roller

    Replacing the pick roller in the 550‑sheet tray

  1. Turn off the printer, and then unplug the power cord from the electrical outlet.

  2. Remove the tray.

  3. Remove the pick roller.

  4. Unpack the new pick roller.

  5. Insert the new pick roller until it clicks into place.

  6. Insert the tray.

  7. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

    Replacing the pick roller in the multipurpose feeder

  1. Turn off the printer, and then unplug the power cord from the electrical outlet.

  2. Open the multipurpose feeder.

  3. Remove the pick roller.

  4. Unpack the new pick roller.

  5. Insert the new pick roller until it clicks into place.

  6. Close the multipurpose feeder.

  7. Connect the power cord to the electrical outlet, and then turn on the printer.

    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Was this article helpful?


Related content

Top