CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported configurations, see
www.lexmark.com/multifunctionprinters.
Turn off the printer.
Unplug the power cord from the electrical outlet, and then from the printer.
Remove the publications holder from the side or rear of the printer.
Unpack the staple, hole punch or booklet finisher.
Remove the standard bin, and then remove the paper bail.
Using the screwdriver stored inside door A, remove the paper guides.
Insert the paper transport.
Note: Use the screws that came with the finisher.
Attach the finisher to the printer.
Insert the staple cartridge into the finisher until it clicks into place.
Remove the filter cover.
Note: This step is applicable only in some printer models.
Connect the finisher cable to the printer.
Reattach the filter cover.
Note: This step is applicable only in some printer models.
Secure the cable.
Insert the bins.
Notes:
- Use the screws that came with the finisher.
- When inserting bin 2, avoid moving the bracket.
- Bin 3 is supported only in the booklet finisher.
Attach the publications holder, and then attach the clamp.
Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer performance.
Turn on the printer.
Add the finisher in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.