Skip to Content Information Center
Lexmark CX923

Lexmark CX923

Replacing the transfer roller

  1. Open door C.

    Notes:

    • Make sure that the door does not hit any cable attached to the printer.
    • If a 3000‑sheet tray is installed, then slide the tray to the right to open the door.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  2. Remove the transfer roller.

  3. Unpack the new transfer roller.

  4. Insert the new transfer roller until it clicks into place.

  5. Close the door.

Was this article helpful?
Top