Skip to Content Information Center
Lexmark CX923

Lexmark CX923

Paper jam in the multipurpose feeder

  1. Remove paper from the multipurpose feeder.

  2. Remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  3. Open door C to remove any paper fragments.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

    Notes:

    • Make sure that the door does not hit any cable attached to the printer.
    • If a 3000‑sheet tray is installed, then slide the tray to the right to open the door.
  4. Close the door.

  5. Flex, fan, and align the paper edges before loading.

  6. Reload paper.

Was this article helpful?
Top