Skip to Content Information Center
Lexmark CX923

Lexmark CX923

Paper jam in the booklet finisher

  1. Open door G, and then remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  2. Open door J.

  3. Open door H.

  4. Remove the jammed paper from any of the following locations.

    Note:  Make sure that all paper fragments are removed.

    • Door J
    • Areas H1 and H2
    • Area H6
  5. Pull out the booklet maker.

  6. Remove the jammed paper from any of the following locations.

    Note:  Make sure that all paper fragments are removed.

    • Area H8
    • Area H9
    • Area H10
  7. Push the booklet maker back into place.

  8. Close doors H and J.

Was this article helpful?
Top