Skip to Content Information Center
Lexmark CX923

Lexmark CX923

Paper jam in door C

  1. Open door C.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

    Notes:

    • Make sure that the door does not hit any cable attached to the printer.
    • If a 3000‑sheet tray is installed, then slide the tray to the right to open the door.
  2. Remove the jammed paper from any of the following locations.

    Note:  Make sure that all paper fragments are removed.

    • Fuser area
    • Below the fuser area
    • Duplex area
    • Above the duplex area
  3. Open the standard trays, and then remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  4. Close the trays, and then close the door.

Was this article helpful?
Top